|
Home > Pumps > Peabody Barnes Pumps
Advanced Bearings & Belts Company is pleased to provide the following PEABODY BARNES pumps for your convenience. If you have any questions, please do not hesitate to contact us. |
|
Heavy Duty Pedestal Sump Pumps - Series 92B & 1100 |
 Applications:
Ideal for removal of drainage water in basements, boiler blow down pits, hot water transfer, industrial wastewater removal.
Model No. |
Discharge NPT |
hp |
115 |
ph |
Amps |
Column
Height |
92B |
1-1/4 |
1/3 |
115 |
1 |
5.8 |
24" |
1100EXP |
1-1/4 |
1/3 |
115 |
1 |
6.4 |
24" |
1148EXP |
1-1/4 |
1/3 |
115 |
1 |
6.4 |
48" |
Pump Specifications
:
| Discharge |
1 1/4" NPT |
| Pump body |
Bronze |
| Bottom Plate |
Bronze |
| Impeller |
Open trash type - Bronze |
| Column |
Brass |
| Shaft |
Stainless Steel |
| Bearing |
Bronze - Self Lubricating |
| Model 92B |
Snap-action switch with rod & copper float, adjustable |
Model
1100EXP, 1148EXP |
Square-D explosion proof float switch with brass rod & copper ball, adjustable |
Motor Specifications
| Horsepower |
Model 92B - 1/3 hp motor with automatic thermal protection and 8 ft. (2.4m) cord.
Model 1100EXP & 1148EXP - 1/3 hp explosion proof motor ball/ball bearings (Class1, Group D, Class Group F & G). Overload protection required in magnetic starter. |
| Voltage |
115 volt |
| Motor Speed |
1725 RPM |
Back to Top |
| If you have any questions or would like to place an order, please feel free to contact us at sales@advancedbearings.com or by phone at 847-895-1111. |
|
Barnes Submersible Sump Pumps |
Series BP25, BP33 & BP50
Applications:
Ideal for use in home basements, garages, Barnes, cottages, plus many, many more.
Model No. |
Discharge NPT |
hp |
115 |
ph |
Amps |
BP25 |
1-1/2 |
1/4 |
115 |
1 |
5.8 |
BP33 |
1-1/2 |
1/3 |
115 |
1 |
6.4 |
BP50 |
1-1/2 |
1/2 |
115 |
1 |
6.4 |
Pump Specifications
| Pump body |
Thermo plastic |
| Bottom Plate |
Thermo plastic |
| Hardware |
Corrosion resistant |
| Impeller |
Vortex - Thermo plastic |
| Shaft Seal |
Mechanical type with ceramic & carbon faces |
| Power Cord |
10 ft. (3m) or 20 ft. (6m) type "SITW" with molded plug - grounded |
| Automatic Operation |
A = Wide angle mechanical float (BP25A)
VF = Adjustable vertical float switch (BP25VF) |
Motor Specifications
| Motor Housing |
Cast iron |
| Motor |
Oil filled with automatic thermal protection |
| Voltage |
115 volt, single phase |
| Motor Speed |
BP25 - 2850 rpm; BP33, BP50 - 1550 rpm |
| Shaft |
Carbon steel |
| Bearings |
Sleeve, oil lubricated |
Back to Top |
| If you have any questions or would like to place an order, please feel free to contact us at sales@advancedbearings.com or by phone at 847-895-1111. |
|
Barnes Submersible Sump & Effluent Pumps - Deluxe All Cast Iron |
Series EH & EHV
Applications:
Ideal for the removal of waste water where higher discharge head is required.
Model No. |
Discharge NPT |
hp |
115 |
ph |
Amps |
EH-25 |
1-1/2 |
1/4 |
115 |
1 |
10.5 |
2EH-314L |
2 |
1/3 |
115 |
1 |
6.5 |
2EHV-33IL |
2 |
1/3 |
115 |
1 |
12.5 |
2EHV-412L |
2 |
4/10 |
115 |
1 |
8.8 |
Pump Specifications
| Pump Body |
Cast iron - Class 30 |
| Motor Housing |
Cast iron - Class 30 |
| Impeller |
EHV: Vortex cast iron with pressure vanes on back side
EH: 2 vanes, cast iron with pressure vanes on back side |
| Hardware |
300 series stainless steel |
| Shaft Seal |
Mechanical type with ceramic & carbon faces, stainless steel spring & Buna-N elastomer |
| Power Cord |
20 ft. (6m) type "SITW" with molded plug - grounded |
| Automatic Operation |
A = Wide angle mechanical float (EH25A)
VF = Adjustable vertical float switch (EH25VF) |
Motor Specifications
| Motor |
Oil filled with automatic thermal protection |
| Insulation |
Class-B |
| Motor Speed |
EHV412 - 3250 rpm, EH-25, EHV331, EH314 - 1750 rpm |
| Shaft |
1/2" diameter Stainless Steel |
| Thrust Bearings |
Ball, oil lubricated |
| Radial Bearing |
314 & 412 Bearing
25 & 331 - Sleeve |
Back to Top |
| If you have any questions or would like to place an order, please feel free to contact us at sales@advancedbearings.com or by phone at 847-895-1111. |
|
Barnes Heavy Duty High Head Submersible Effluent Pumps |
 Series EHH 4/10 and 1.0 hp
Single Seal with Secondary Exclusion Seal
Pump Specifications
| Sizes |
2" discharge |
| Pump Body |
Cast iron - Class 30 |
| Motor Housing |
Cast iron - Class 30 |
| Impeller |
Open, 2 vane, cast iron with pressure vanes on back side |
| Hardware |
stainless steel |
| Seal |
Mechanical type in oil filled chamber with secondary exclusion seal, carbon ceramic faces, stainless steel hardware and Buna-N elastomer |
| Suitable for |
104ºF (40ºC) liquids |
| Standard Equipment |
All models supplied with carrying handle and 20' (6m) of cable. single phase size 14/3 type "SJTW". Three phase size 14/4 type "SOW" |
Motor Specifications
| Single Phase |
PSC (Permanent Split Capacitor) completely oil-filled with overload protection in motor. |
| Three Phase |
Completely oil filled. Protection required in magnetic starter. |
| Motor Speed |
3450 rpm |
| Insulation |
Class-B |
| Shaft |
Stainless Steel |
| Thrust Bearings |
Ball, oil lubricated |
| Radial Bearing |
Ball, oil lubricated |
| Electrical Ratings |
4/10 hp - 115V 1hp 11.5A
4/10 hp - 230V 1ph 5.8A
1.0 hp - 230V 1ph 9.3A
4/10 hp - 208V 3.3A, 230V 3.0A, 460V 1.5A & 575V 1.2A
1.0 hp - 208V 5.9A, 230V 5.4A, 460V 2.8A & 575V 2.3A |
Back to Top
|
| If you have any questions or would like to place an order, please feel free to contact us at sales@advancedbearings.com or by phone at 847-895-1111. |
|
Barnes Submersible Effluent Pumps |
Series EH & STEP
1/2 through 1 1/2 hp Single & Double
Pump Specifications
| Size |
2" discharge |
| Pump Body |
Cast iron - Class 30 |
| Motor Housing |
Cast iron - Class 30 |
| Impeller |
EH Series: 3 vane open, cast iron with pressure vanes on back side
STEP Series: Polypropylene, enclosed. single vane with stainless steel drive insert & wear ring |
| Hardware |
Stainless steel |
| Seal |
Single Seal Series: Mechanical type with carbon & ceramic faces, stainless steel hardware & Buna-N elastomer.
Double Seal Series: Mechanical type in tandem oil filled chamber, carbon & ceramic faces, stainless steel hardware & Buna-N elastomer. |
| Suitable for |
104ºF (40ºC) liquids |
| Standard Equipment |
All models supplied with carrying handle and 20' (6m) of cable with quick plug in terminal plate. Single phase size 14/3 type "SJTW". Three phase size 14/4 type "SOW" |
Motor Specifications
| Single Phase |
PSC (Permanent Split Capacitor) completely oil-filled with overload protection in motor. |
| Three Phase |
Completely oil filled. Protection required in magnetic starter. |
| Motor Speed |
3450 rpm |
| Insulation |
Class-B |
| Shaft |
Stainless Steel |
| Thrust Bearings |
Ball, oil lubricated |
| Radial Bearing |
Ball, oil lubricated |
| Electrical Ratings |
115V-1ph: 1/2 hp 11.4A
230V-1ph: 1/2 hp 4.9A, 1.0 hp 8.1A, 1-1/2 hp 10.9A
208V-3hp: 1/2 hp 4.5A, 1.0 hp 8.1A, 1-1/2 hp 7.8A
230V-3ph: 1/2 hp 4.2A, 1.0 hp 6.2A, 1-1/2 hp 7.0A
460V-3hp: 1/2 hp 2.2A, 1.0 hp 3.1A, 1-1/2 hp 3.5A
575V-3hp: 1/2 hp 1.7A, 1.0 hp 2.8A, 1-1/2 hp 2.7A |
Back to Top
|
| If you have any questions or would like to place an order, please feel free to contact us at sales@advancedbearings.com or by phone at 847-895-1111. |
|
Barnes Submersible Sewage Pumps |
 Series SEV
Applications:
Ideal to handle raw sewage and waste water from basement, washrooms and laundry tubs.
Model No. |
Discharge NPT |
hp |
115 |
ph |
Amps |
2SEV-414 |
2 |
4/10 |
115 |
1 |
12.5 |
2SEV-412 |
2 |
3/10 |
115 |
1 |
8.5 |
Pump Specifications
| Pump Body |
Cast iron, Class 30 |
| Motor Housing |
Cast iron, Class 30 |
| Seal Plate |
Cast iron, Class 30 |
| Impeller |
Vortex - cast iron with pressure vanes on back side. |
| Seal |
Mechanical type with ceramic & carbon faces, stainless steel hardware & Buna-N elastomer. |
| Square Rings |
Buna-N |
| Hardware |
300 series stainless steel |
| Suitable For |
104ºF (40ºC) liquids |
| Power Cord |
20' (6m) type "SJTW" with molded plug |
| Automatic Operation |
A = Wide angle mechanical float (2SEV414A)
VF = Vertical float switch (2SEV414VF) |
Motor Specifications
| Single Phase |
Completely oil filled with overload protection in motor. |
| Motor Speed |
414: 1550 rpm
412: 3250 rpm |
| Shaft |
Stainless steel |
| Thrust Bearing |
Ball, oil lubricated |
| Radial Bearing |
412 - ball; 414 - sleeve |
Back to Top |
| If you have any questions or would like to place an order, please feel free to contact us at sales@advancedbearings.com or by phone at 847-895-1111. |
|
Barnes Medium Head Heavy Duty Submersible Sewage Pumps |
Series 2SE
4/10 through 1 hp
2" Solids Handling
1750 rpm
Single Seal Secondary Exclusion Seal
Pump Specifications
| Size |
2" NPT vertical discharge |
| Pump Body |
Cast iron - Class 30 |
| Motor Housing |
Cast iron - Class 30 |
| Impeller |
2 vane open, cast iron with pressure vanes on back side (4/10 - Zytel - Glass filled) |
| Hardware |
Stainless steel |
| Seal |
Mechanical type in oil filled chamber with secondary exclusion seal, ceramic and carbon faces, stainless steel hardware and Buna-N elastomer. |
| Suitable for |
104ºF (40ºC) liquids |
| Standard Equipment |
All models equipped with legs, carrying handle and 20' (6m) of cable with quick plug in terminal plate. Single phase size 14/3 type "SJTW". Three phase size 14/4 type "SOW" |
Motor Specifications
| Single Phase |
Completely oil filled with overload protection in motor - PSC (permanent split capacitor) |
| Three Phase |
Completely oil filled, overload protection provided in magnetic starter. |
| Motor Speed |
1750 rpm |
| Insulation |
Class-B |
| Shaft |
Stainless Steel |
| Thrust Bearings |
Ball, oil lubricated |
| Radial Bearing |
Ball, oil lubricated |
| Electrical Ratings |
115V-1hp: 4/10 hp 10.5A, 1/2 hp 11.5A
230V-1hp: 1/2 hp 5.5A, 1.0 hp 10.5A
208V-3hp: 1/2 hp 3.3A, 1.0 hp 6.0A
230V-3ph: 1/2 hp 3.0A, 1.0 hp 5.5A
460V-3hp: 1/2 hp 1.7A, 1.0 hp 2.7A
575V-3hp: 1/2 hp 1.4A, 1.0 hp 2.2A |
Back to Top
|
| If you have any questions or would like to place an order, please feel free to contact us at sales@advancedbearings.com or by phone at 847-895-1111. |
|
Barnes Medium Head Heavy Duty Submersible Sewage Pump |
Series SE & SEV
1/2 through 1 hp
2" Solids Handling
1750 rpm
Single & Double Seal
Pump Specifications
| Size |
2" & 3" NPT vertical discharge |
| Pump Body |
Cast iron - Class 30 |
| Motor Housing |
Cast iron - Class 30 |
| Impeller |
SE Series: 2 vane open, cast iron with pressure vanes on back side
SEV Series: Vortex - 12 vanes, cast iron with pressure vane on back side. |
| Hardware |
Stainless steel |
| Seal |
Single Seal Series: Mechanical type with ceramic and carbon faces, stainless steel hardware and Buna-N elastomer.
Double Seal Series: Mechanical type in tandem, oil filled chamber, carbon & ceramic faces, stainless steel hardware & Buna-N elastomer. |
| Square Rings |
Buna-N |
| Suitable for |
104ºF (40ºC) liquids |
| Standard Equipment |
All models equipped with legs, carrying handle and 20' (6m) of cable with quick plug in terminal plate. Single phase size 14/3 type "SJTW". Three phase size 14/4 type "SOW" |
| Option |
Seal material, additional cable, temperature sensor & seal leak sensor on double seal only. |
Motor Specifications
| Single Phase |
Completely oil filled with overload protection in motor - PSC (permanent split capacitor) |
| Three Phase |
Completely oil filled, overload protection provided in magnetic starter. |
| Motor Speed |
1750 rpm |
| Insulation |
Class-B |
| Shaft |
Stainless Steel |
| Bearings |
Ball, oil lubricated |
| Electrical Ratings |
115V-1hp: 1/2 hp 11.5A
230V-1hp: 1/2 hp 5.9A, 3/4 hp 8.9A, 1.0 hp 8.5A
208V-3hp: 1/2 hp 3.2A, 3/4 hp 4.8A, 1.0 hp 6.8A
230V-3ph: 1/2 hp 3.0A, 3/4 hp 4.4A, 1.0 hp 6.0A
460V-3hp: 1/2 hp 1.5A, 3/4 hp 2.3A, 1.0 hp 3.0A
575V-3hp: 1/2 hp 1.0A, 3/4 hp 1.6A, 1.0 hp 2.4A |
Back to Top
|
| If you have any questions or would like to place an order, please feel free to contact us at sales@advancedbearings.com or by phone at 847-895-1111. |
|
Barnes High Head Heavy Duty Vortex Submersible Sewage Pump |
Series SEV
1/2 through 2.0 hp
2" Solids Handling
3450 rpm
Single & Double Seal
Pump Specifications
| Size |
2" & 3" NPT vertical discharge |
| Pump Body |
Cast iron - Class 30 |
| Motor Housing |
Cast iron - Class 30 |
| Impeller |
7 vane, vortex, bronze with pressure vanes on back side. |
| Hardware |
Stainless steel |
| Seal |
Single Seal Series: Mechanical type with ceramic and carbon faces, stainless steel hardware and Buna-N elastomer.
Double Seal Series: Mechanical type in tandem, oil filled chamber, carbon & ceramic faces, stainless steel hardware & Buna-N elastomer. |
| Square Rings |
Buna-N |
| Suitable for |
104ºF (40ºC) liquids |
| Standard Equipment |
All models equipped with carrying handle and 20' (6m) of cable with quick plug in terminal plate. Single phase size 14/3 type "SJTW" or 10/3 type "SOW". Three phase size 14/4 type "SOW" |
| Option |
Seal material, additional cable, temperature sensor & seal leak sensor on double seal only. |
Motor Specifications
| Single Phase |
Completely oil filled with overload protection in motor - PSC (permanent split capacitor) |
| Three Phase |
Completely oil filled, overload protection provided in magnetic starter. |
| Motor Speed |
3450 rpm |
| Insulation |
Class-B |
| Shaft |
Stainless Steel |
| Bearings |
Ball, oil lubricated |
| Electrical Ratings |
115V-1hp: 1/2 hp 12.6A
230V-1hp:
1/2 hp 6.0A, 1.0 hp 10.7A, 1-1/2 hp 13.5A, 2.0 hp 16.0A
208V-3hp:
1/2 hp 5.8A, 1.0 hp 7.0A, 1-1/2 hp 10.8A, 2.0 hp 13.2A
230V-3hp:
1/2 hp 5.3A, 1.0 hp 7.5A, 1-1/2 hp 9.8A, 2.0 hp 12.0A
460V-3hp:
1/2 hp 2.6A, 1.0 hp 3.7A, 1-1/2 hp 4.9A, 2.0 hp 6.0A
575V-3hp:
1/2 hp 2.1A, 1.0 hp 2.9A, 1-1/2 hp 3.9A, 2.0 hp 4.8A |
Back to Top |
| If you have any questions or would like to place an order, please feel free to contact us at sales@advancedbearings.com or by phone at 847-895-1111. |
|
Barnes Heavy Duty Submersible Sewage Pump |
Series 3SE
1.1 through 2.0 hp
2 1.1" Solids Handling
1750 rpm
Single & Double Seal
Pump Specifications
| Size |
3" NPT vertical discharge |
| Pump Body |
Cast iron - Class 30 |
| Motor Housing |
Cast iron - Class 30 |
| Impeller |
2 vane open, cast iron with pressure vanes on back side. |
| Hardware |
Stainless steel |
| Seal |
Single Seal Series: Mechanical type with ceramic and carbon faces, stainless steel hardware and Buna-N elastomer.
Double Seal Series: Mechanical type in tandem, oil filled chamber, carbon & ceramic faces, stainless steel hardware & Buna-N elastomer. |
| Square Rings |
Buna-N |
| Suitable for |
104ºF (40ºC) liquids |
| Standard Equipment |
All models equipped with carrying handle and 20' (6m) of cable with quick plug in terminal plate. Single phase size 10/3 type "SOW". Three phase size 14/4 type "SOW" |
| Option |
Seal material, additional cable, temperature sensor & seal leak sensor on double seal only. |
Motor Specifications
| Single Phase |
Completely oil filled with overload protection in motor - PSC (permanent split capacitor) |
| Three Phase |
Completely oil filled, overload protection provided in magnetic starter. |
| Motor Speed |
1750 rpm |
| Insulation |
Class-B |
| Shaft |
Stainless Steel |
| Bearings |
Ball, oil lubricated |
| Electrical Ratings |
230V-1hp:
1.1 hp 10.5A, 1.5 hp 12.6A, 2.0 hp 14.5A
208V-3hp:
1.1 hp 10.5A, 1.5 hp 13.3A, 2.0 hp 15.2A
230V-3hp:
1.1 hp 10.5A, 1.5 hp 11.6A, 2.0 hp 13.2A
460V-3hp:
1.1 hp 10.5A, 1.5 hp 5.8A, , 2.0 hp 6.6A
575V-3hp:
1.1 hp 10.5A, 1.5 hp 4.6A, 2.0 hp 5.2A |
Back to Top |
| If you have any questions or would like to place an order, please feel free to contact us at sales@advancedbearings.com or by phone at 847-895-1111. |
|
|
|
